TP-Link Touch P5 AC1900 User Manual page 64

5. Change a web browser or computer and login again.
6. Reset your Touch P5 to factory default settings: With your Touch P5 powered on, press and hold the
back panel until the Touch P5 logo displays.
Note: You'll need to reconfigure your Touch P5 to surf the Internet once your Touch P5 is reset.
If this doesn't solve the problem, please contact the technical support.
Q7. I cannot find my wireless network or I cannot connect the wireless network, what can I do?
1. If you fail to find any wireless network, please follow the steps below:
1 ) Make sure the wireless function is enabled if you're using a laptop with built-in wireless adapter. You can refer to the
relevant document or contact the laptop manufacturer.
2 ) Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled.
On Windows 7
a . If you see the message
blocked somehow;
b . Clicking on
On Windows XP
a . If you see the message
configuration utility is disabled or you are running another wireless configuration tool to connect the wireless;
b . Exit the wireless configuration tool( the TP-LINK Utility, for example);
c . Select and right click on
d . Expand Services and Applications
the right side;
e . Select Wireless Zero
Chapter 2 . Configure Touch P5 as a Router
No connections are
Troubleshoot and windows might be able to fix the problem by itself.
Windows cannot configure this wireless
My Computer
> Services, find and locate
Configuration, right click, and then select Properties;
available, it is usually because the wireless function is disabled or
on desktop, select Manage
Wireless Zero Configuration
Reset
connection, this is usually because windows
to open Computer Management window;
in the Services list on
button on the
61