Table of Contents
Advertisement
3. 6
LAN
By default, your Touch P5 is set to obtain an IP address automatically from the host router. The LAN app allows you to use a
specific IP address appropriate to your network demand.
Note: We do
NOT
recommend you change the IP address unless you are quite sure about the IP setting for special network
demand. Random changes may lead to Internet disconnection.
1.
On the menu screen, tap the
2.
Tap
Type
to select
Use the following IP address
3.
Tap
IP Address
to enter an IP address in dotted decimal notation. It should be in the same subnet as the host network.
4.
Tap
Subnet Mask
to enter the subnet mask in dotted decimal notation. It determines the network portion and host
portion of the IP address.
5.
Tap
Default Gateway
6.
Tap Save.
Chapter 3 .
Configure Touch P5 as a Repeater
LAN
icon to open it.
to enter the gateway in dotted decimal notation . It should be in the same subnet as the IP address.
and tap Done.
76
Hide quick links:
Advertisement
Table of Contents
