TP-Link Touch P5 AC1900 User Manual page 37

4 ) Tap Save.
3. Return to the home screen of QoS, and select High,
an example.
4. Select By Device to add the rule:
Tap View to choose the respective device, if the device is not listed, enter the
Tap Save to add the rule to the list.
Select By Application
Tap Application to select the corresponding application, if the application is not listed, tap
below application parameters manually.
• Name: Type in a name for your application.
• Protocol: Select the protocol for your application, if you are not sure, select ALL.
• Port: Enter the destination port for your application, usually each application has a fixed port, please ensure you enter
the correct the port.
Tap Save to add the rule to the list.
Chapter 2 . Configure Touch P5 as a Router
to add the rule:
Middle or Low Priority to Add the rules. Here we use
Device Name and MAC Address
Custom Application
High Priority as
manually.
to enter
34