TP-Link Touch P5 AC1900 User Manual page 103

2 ) Enter the MAC Address
3 ) Specify the IP Address
4 ) Enter the Description
5 ) Check the Enable This Entry
Note: If you want to modify a reserved address, tap the reserved address to modify it. If you want to add or delete a
reserved address, tap
Chapter 4 . Configure Touch P5 as an Access Point
of the device for which you want to reserve IP address.
which will be reserved for the device.
for the device.
box and tap Save
Edit to set up according to your needs.
to make the settings effective (shown as figure below).
100