The Back Panel - TP-Link Touch P5 AC1900 User Manual

Menu Screen
Tap the icons to perform various functions of your Touch P5, such as Quick Setup, Mode Selection, Parental Controls, etc.

1. 3. 2. The Back Panel

Your Touch P5's back panel shows the connection ports, buttons and antennas. Refer to the following for detailed instructions.
Item
Power
Power On/Off
USB 2.0
USB 3.0
Internet
Ethernet (1, 2, 3, 4)
Reset
Antennas
Chapter 1 . Get to Know about Touch P5
For connecting your Touch P5 to power socket via the provided power adapter.
The switch for the power. Press it to power on or off your Touch P5.
For connecting to a USB 2.0 storage device or a USB 2.0 printer.
It's on the right front corner of your Touch P5.
For connecting to a 3.0 USB storage device or a 3.0 USB printer. It is also compatible with USB 2.0 devices.
In router mode, it's used for connecting to the DSL/cable Modem or Internet.
In repeater mode, it's used for connecting to Ethernet-enabled device, working the same as the Ethernet port.
In access point mode, it's used for connecting to front router or Internet.
These ports (1, 2, 3, 4) connect your Touch P5 to the local computer(s).
With your Touch P5 powered on, use a pin to press and hold the Reset button until the Touch P5 logo displays.
Used for wireless operation and data transmit. Upright them for the best Wi-Fi performance.
Description
4