TP-Link Touch P5 AC1900 User Manual page 52

2.
Customize Your Settings
To Only Share Specific Content
By default, Share All
the steps below:
1 ) Visit http://tplinkwifi.net/, then log in with the username and password you set for your Touch P5.
2 ) Select Basic > USB Settings
3 ) Focus on the section of
folder.
4 ) Select the Volume Name
5 ) Tick Enable Media Sharing
Note:
Touch P5 can share eight volumes at most. You can click
not need to share.
To Specify the Media Server
You can also modify the media server name or disable the feature of Media Sharing as needed.
1 ) Visit http://tplinkwifi.net/, then log in with the password you set for your Touch P5.
2 ) Select Basic > USB Settings
3 ) Enter a Network/Media Server Name
4 ) Click Save.
Chapter 2 . Configure Touch P5 as a Router
is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow
> Sharing Access.
Folder Sharing. Click the button to disable
and Folder Path, then enter a
and click OK.
> Sharing Access.
as you like, such as MyShare.
Share All, then click
Folder Name as you like.
on the page to detach the corresponding volume you do
Add to add a new sharing
49