TP-Link Touch P5 AC1900 User Manual page 47

3 ) Select the Volume Name
4 ) Decide the way you share the folder:
Allow Guest Network
Enable Authentication: Tick to enable authentication for this folder sharing, and you will be required to use a
username and password to access the USB disk. Refer to
Enable Write Access: If you tick this check box, network clients can modify this folder.
Enable Media Sharing: Tick to enable media sharing for this folder, and you can view photos, play music and watch
movies stored on the USB disk directly from DLNA-supported devices. Click
5 ) Click OK.
Note:
Touch P5 can share eight volumes at most. You can click
not need to share.
To Set up Authentication for Data Security
If you enable Authentication, network clients will be required to enter the username and password you set when
accessing the USB disk.
1 ) Visit http://tplinkwifi.net/, then log in with the username and password you set for your Touch P5.
2 ) Select Advanced
Chapter 2 . Configure Touch P5 as a Router
and Folder Path, then enter a
Access: Tick to allow the clients in your guest network to access the shared folder.
> USB Settings > Sharing
Folder Name
To Set up Authentication for Data Security
on the page to detach the corresponding volume you do
Access.
as you like.
Media Sharing to learn more.
to learn more.
44