Table of Contents
Advertisement
Chapter 16
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3.
Flow Controller
is enabled by default. Please note that enable
cause internet drop with some devices.
16 5
Configure to Support IPTV Service
I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to
Advanced
3 If your ISP provides the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK:
1 ) Tick the
IGMP Proxy
either V2 or V3, as required by your ISP.
Network
> LAN, and locate the
>
Network
> IPTV/VLAN.
and
IGMP Snooping
Customize Your Network Settings
Flow Controller
Flow Controller
checkbox, then select the
section.
may
IGMP
Version,
107
Advertisement
Table of Contents
