Table of Contents
Advertisement
Telephone System Features
I
C
NTERCOM
ALLS
Placing Intercom Calls
The Basics
To place an intercom call:
— With or without the handset lifted, dial an extension number.
— If your call goes through handsfree to a keyset's speaker, speak after you hear a
double tone.
If you hear continuous ringing, wait for the call to be answered.
Options
To place a non-handsfree call that will ring at the other keyset until answered, press
before dialling the extension number.
#
To program your phone to always send non-handsfree calls using the "Ring Inter-
com Always" feature or to cancel this feature, with the handset in the cradle, dial
.
7
7
3
To leave a message if there is no answer or the phone is busy, press
hang up, OR wait for their message centre to answer. (See
options.)
If the phone is busy when you place an intercom call, you can do any of the follow-
ing:
— To stay on the line and wait for the phone to become available, do not hang up.
After a system timer expires, you hear music until the phone is available. (You
cannot do this if the called phone is in do-not-disturb mode.)
— To request a callback (queue on to the phone), press
phone is available, your phone rings. (To cancel the queue request before the call-
back, press
— To use the "Off-Hook Voice Announce" feature (if the called keyset is pro-
grammed for it), do not hang up. After the busy signals stop, you are automati-
cally connected and may speak. (If you hear music, or if the phone is in do-not-
disturb mode, your off-hook voice announce call will not go through.) This
allows you to talk to the keyset user on his or her handsfree speakerphone, even
though the user already has a call in progress on the handset.
8
.)
6
AXXESS Standard and Basic Keyset and AXXESSORY Talk Guide
. Then
MSG
page 16
for more Message
and hang up. When the
6
Advertisement
Table of Contents
