P
C
LACING
ONFERENCE
You can establish multi-party conference calls without operator assistance. You can
place any combination of up to three intercom or outside parties in the conference.
The Basics
To establish a conference call:
— While on the first call, press
— Place another intercom or outside call. Place it on hold by pressing the flashing
CNF
— Press the flashing
Options
During the conference call, you can do the following:
— To place the conference on hold, press
hold (the parties are still connected). To return to the conference, press
— To drop out of the conference, press
phone from the conference, but leaves the other parties connected.
— To add additional parties to the conference, do the following:
•
Press
•
Place a call to the party to be added to the conference.
•
Press
— To end the conference and place all parties on individual hold, press
then press
speak to one party at a time by pressing
— To mute your microphone, press
during the conference. You can hear the conference parties, but they cannot hear
you.
— To transfer the conference to another extension or to Voice Mail, press
and dial the desired extension number. Then hang up when you are ready to com-
plete the transfer.
AXXESS Standard and Basic Keyset and AXXESSORY Talk Guide
C
ALLS
CNF
. (If necessary, repeat this step to place one more call on hold.)
to join all of the calls together in the conference.
CNF
. This leaves the conference parties connected.
CNF
twice to put yourself and the new party into the conference.
CNF
to place all of the parties on individual hold. You can then
HOLD
to put the call on hold.
. This places the conference on
HOLD
. Then hang up. This removes your
CNF
or a flashing key.
HOLD
. This turns your microphone on or off
MUTE
.
CNF
and
CNF
TRANSFER
15