Mount An Electric Motor - GREAT PLANES Sequence 1.20 Instruction Manual

❏
4. Mount the fuel tank with a piece of 1/4" [6.4mm] R/C
foam underneath and securely tighten the strap.
❏
5. Connect the fuel lines (not included) to the engine. A
plastic fuel line plug is included for plugging the fi ll line after
fueling.
Proceed to "CUT THE COWL" on page 16.

Mount an Electric Motor

Before mounting the motor and setting up the ESC and
battery, read the following important battery precautions:
IMPORTANT: If using multiple battery packs that are connected
with an adapter, never charge the batteries together through
the adapter. Always charge each battery pack separately.
Charge the batteries, then read the following precautions on
how to connect multiple packs for fl ying the model:
Battery Precautions:
There are two ways to connect multiple battery packs: In
Series and in Parallel.
These are two 3200mAh batteries (one 11.1V and the
other 7.4V). When joined in SERIES, the result will be
a 18.5V, 3200 mAh battery.
that connects two batteries in series.
1. Connecting batteries in "Series" means to connect the
+'s to the –'s and the –'s to the +'s. This combines the
battery's Voltages, but the capacity remains the same.
These two 1500mAh batteries (both 11.1V) are being
joined in PARALLEL. The result will be one 11.1V,
3000mAh battery.
11.1V
(3-Cell) 1500 mAh
This is a PARALLEL battery adapter that
connects two batteries in parallel.
(3-Cell) 1500 mAh
2. Connecting batteries in "Parallel" means to connect
the +'s to the +'s and the -'s to the -'s. This combines the
battery's capacities, but the Voltage remains the same.
12
11.1V
(3-Cell) 3200 mAh
This is a SERIES battery adapter
7.4V
(2-Cell) 3200 mAh
11.1V