Component Identification
2.5-13 Platform Control Console
This removable control console is mounted at the right
front of the platform. It contains the following controls:
1
5
6
Figure 2-10. Platform Control Console
with Toggle Switch
1
7
Figure 2-11. Platform Control Console
with Rotary Switch
1.
Lift/Drive/Steer Enable Trigger Switch - This
momentary "
" switch energizes the controller.
It must be held depressed continuously while
engaging either the lift/drive or steer functions.
2.
Lift/Drive/Steer Controller - This one-hand lever
controls lift/drive and steer motions. Internal
springs return it to neutral when controller is
released.
TM
Page 20
3.
Emergency Stop Button/Operation Light - This
button "
power to the control circuit. The operation light
indicates upper control availability and overload
2
status. When the light is continuously illuminated,
upper controls are available. When the light is
flashing, it signals an overload function. Refer to
Section
3
4.
Horn Pushbutton - This "
an automotive-type horn.
5.
Inclined Drive/Level Drive Switch (If Equipped)
4
- This switch selects "
speed/high torque) or "
speed/low torque).
Inclined drive (low speed/high torque) is
not available on models 3215 and 3219.
2
6.
Lift/Off/Drive Switch - Selecting "
disconnects power from both lift and drive circuits.
Selecting "
3
Selecting "
circuit.
7.
Lift/Inclined Drive/Level Drive Switch - This
4
switch selects "
speed/high torque) or "
speed/low torque).
Inclined drive (low speed/high torque) is
not available on 3215 and 3219 models.
December 2007
Section 2 - Operation
", when depressed, disconnects
2.5-3.
" pushbutton sounds
" inclined drive (low
" level drive (high
Note
" lift position energizes the lift circuit.
" drive position energizes the drive
" lift, "
" inclined drive (low
" level drive (high
Note
SJIII Compacts & Conventionals
" off position