Start Operation
2.10-5 To Drive Forward or Backward
wARNiNG
Be aware of blind spots when operating
the aerial platform.
wARNiNG
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1.
Activate platform control console (refer to
Section
2.10-3).
2.
For platform control console with toggle switch:
Select lift/off/drive switch to "
For platform control console with rotary switch:
Select lift/inclined drive/level drive switch to either
"
" inclined drive (low speed/high torque)
or "
" level drive (high speed/low torque)
position.
3.
Activate and hold "
4.
Move controller handle "
"
" backward/down to desired speed and
direction of aerial platform travel.
5.
Return controller to neutral center position to stop.
Release "
" enable trigger switch.
wARNiNG
To protect against unintended movement of
the aerial platform, push in the emergency
stop button after you have arrived at your
desired location or elevation.
TM
Page 40
" drive position.
" enable trigger switch.
" forward/up or
December 2007
2.10-6 To Steer
1.
Activate platform control console (refer to
Section
2.10-3).
2.
For platform control console with toggle switch:
Select lift/off/drive switch to "
For platform control console with rotary switch:
Select lift/inclined drive/level drive switch to either
"
" inclined drive (low speed/high torque)
or "
" level drive (high speed/low torque)
position.
3.
Activate and hold "
4.
Press "
" rocker switch on top of controller
handle in either direction to steer.
Note
Steering is not proportional. Driving and
steering may be active at the same time.
SJIII Compacts & Conventionals
Section 2 - Operation
" drive position.
" enable trigger switch.