Cannot adjust paper feed.
Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot adjust printhead. ........................................................................................................................................... 125
Borderless printng not possible. ............................................................................................................................ 120
Cannot adjust paper feed. ........................................................................................................................................ 124
Check printed document. .......................................................................................................................................... 124
Cannot adjust paper feed.
Cannot adjust paper feed.
The Printhead nozzles are clogged.
Highly transparent film is loaded that cannot be
used for automatic feed amount adjustment.
Check printed document.
Check printed document.
The Printhead nozzles are becoming clogged.
124
Cause
Cause
If printing is faint, clean the Printhead.
Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4.
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.")
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.")
Corrective Action
(See "Cleaning the Printhead.")
Corrective Action
User's Guide
➔
P.44
➔
User's Guide
➔
User's Guide
➔
P.44
➔
iPF785 Series
Basic Guide