End Of Paper Feed; Rel Lever Is In Wrong Position; Borderless Printng Not Possible - Canon iPF785 Series Basic Manual

End of paper feed.

Cause
In other cases, the Cutter
Unit may be damaged.
End of paper feed.
End of paper feed.
Although an attempt was made to advance the paper manually, it reached
the limit position that can be advanced.

Rel lever is in wrong position.

Rel lever is in wrong position.
Cause
The Release Lever is pushed back.

Borderless printng not possible.

Borderless printng not possible.
Cause
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
The loaded paper is a size not
compatible with borderless
printing.
Because paper expands or con-
tracts depending on the envi-
ronment of use, it may become
narrower or wider than the sup-
ported width for borderless
printing.
120
Contact your Canon dealer for assistance.
Cause
Pull the Release Lever forward.
Turn off the printer and wait a while before restoring power.
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper Ref-
erence Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2. Replace the paper with paper compatible for borderless printing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Ref-
erence Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Corrective Action
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
Corrective Action
Corrective Action
User's Guide
➔
P.18
➔
User's Guide
➔
P.12
➔
P.15
➔
User's Guide
➔
User's Guide
➔
iPF785 Series
Corrective Action
User's Guide
➔
}
}
Basic Guide