Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Neatly; Paper Is Not Cut - Canon iPF785 Series Basic Manual

Hide thumbs Also See for iPF785 Series:
Table of Contents

Advertisement

iPF785 Series
8
Pull the Release Lever forward.

Roll paper cannot be inserted into the paper feed slot

Roll paper cannot be inserted into the paper feed slot
Cause
The roll paper is warped.
Paper is jammed by the paper feed slot.
The paper source selection is incorrect.

Cannot load sheets

Cannot load sheets
Cause
The paper source selection is incorrect.

Paper is not cut neatly

Paper is not cut neatly
Cause
The paper is bent or curled at the cut posi-
tion.
Paper rises by the ends of the cut position
before it is cut.
You are using paper that cannot be cut with
the Cutter Unit.
Cut Speed is not configured correctly in the
Control Panel menu.
During cutting, printed documents fall out at
an angle.

Paper is not cut

Paper is not cut
In the printer driver, No or Print Cut Guideline is specified
in Automatic Cutting.
In the Control Panel menu, Cutting Mode is set to Eject
or Manual.
Basic Guide
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Press the Load button and select the paper source.
Press the Load button and select the paper source.
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.")
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-
ing, as they are cut.
(See "Specifying the Cutting Method for Rolls.")
Cause
Roll paper cannot be inserted into the paper feed slot
Corrective Action
P.85
P.88
Corrective Action
Corrective Action
P.51
Corrective Action
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).")
(See "Paper Detailed Settings Dialog Box (Mac OS).")
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.")
User's Guide
User's Guide
User's Guide
User's Guide
User's Guide
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents