The Surface Of The Paper Is Dirty; The Back Side Of The Paper Is Dirty; Printed Colors Are Inaccurate - Canon iPF785 Series Basic Manual

iPF785 Series
Cause
You are printing on heavyweight pa-
per or paper that curls or wrinkles
easily after absorbing ink.
The Ejection Guide is soiled.

The surface of the paper is dirty

The surface of the paper is dirty
Cause
The Paper Retainer is soiled.
You are using a paper that
does not dry easily.

The back side of the paper is dirty

The back side of the paper is dirty
Cause
The Platen has become dirty after borderless
printing or printing on small paper.
The Platen has become soiled because you
have set Width Detection to Off in the Control
Panel menu.
The Paper Retainer is soiled.

Printed colors are inaccurate

Printed colors are inaccurate
Cause
Color adjustment has not been activated in the
Advanced Settings of the printer driver.
Colors have not been adjusted on the comput-
er or monitor.
The Printhead nozzles are clogged.
Application Color Matching Priority is set to
Off in the Windows printer driver.
Basic Guide
For film-based media such as Tracing Paper, set the VacuumStrngth to Standard, Strong
or Strongest in the Control Panel menu. If the paper still rubs against the printhead, set the
Head Height in the Control Panel menu to a higher value than the current setting.
(See "Adjusting the Vacuum Strength.")
(See "Troubleshooting Paper Abrasion and Blurry Images.")
Clean the Ejection Guide.
(See "Cleaning the Printer Exterior.")
Clean the Paper Retainer.
(See "Cleaning Inside the Top Cover.")
In the Control Panel menu, set Roll DryingTime to at least 1 min.
(See "Menu Settings.")
User's Guide
➔
When paper that does not dry easily is used for printing, it may curl during printing and touch the
Output Tray.
In this case, in the Control Panel menu, complete the settings for Dry time and Area in Scan Wait
Time.
However, note that printing will now take longer.
(See "Menu Settings.")
User's Guide
➔
Open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top Cover.")
Set Width Detection to On in the Control Panel menu, and then open the Top
Cover and clean the Platen.
(See "Cleaning Inside the Top Cover.")
Open the Top Cover and clean the Platen. After this, manually advance the roll
onto the Platen before printing.
(See "Cleaning Inside the Top Cover.")
(See "Feeding Roll Paper Manually.")
Clean the Paper Retainer.
(See "Cleaning Inside the Top Cover.")
In the Advanced Settings of the printer driver, access Color Settings in Color
Mode to adjust colors.
(See "Main Sheet (Windows).")
(See "Main Pane (Mac OS X).")
Refer to the computer and monitor documentation to adjust the colors.
Adjust the settings of the color management software, referring to the software
documentation as needed.
Print a test pattern to check the nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.")
Click Special Settings in the Layout sheet of the printer driver, and set Applica-
tion Color Matching Priority to On in the dialog box that is displayed.
(See "Layout Sheet (Windows).")
Corrective Action
User's Guide
➔
User's Guide
➔
User's Guide
➔
Corrective Action
P.42
➔
Corrective Action
P.42
➔
P.42
➔
P.42
➔
User's Guide
➔
P.42
➔
Corrective Action
User's Guide
➔
User's Guide
➔
User's Guide
➔
User's Guide
➔
The surface of the paper is dirty
99