Care And Cleaning - Monogram ZVB30 Owner's Manual

Grease filters
Painted or
stainless
steel
surfaces
The efficiency of your downdraft depends on a
clean filter . Frequency of cleaning depends on the
type of cooking you do . Grease filters should be
cleaned at least once a month . Never operate the
downdraft without the filters in place .
To remove: Slip fingers into the vent holes, lift the
vent straight up and pull forward . Grasp the filter
tabs, push down and out of the retainer .
To clean: Soak and then agitate in a hot detergent
solution . Light brushing may be used to remove
embedded soil . Rinse, shake and remove moisture
before replacing . Do not clean the filters in the
dishwasher.
With careful handling, the filter will last for years .
If replacement becomes necessary, order the part
from your dealer .
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm,
sudsy water or a stainless steel cleaner or polish .
Always wipe the surface in the direction of the grain .
Follow the cleaner instructions for cleaning the
stainless steel surface .
For difficult stains on stainless steel, use a cleaner
that contains lactic acid or citric acid .

Care and Cleaning

Downdraft Vent System
Filter Tabs
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, please call our toll-free
number:
National Parts Center
GEAppliances.com
800.626.2002 (U.S.)
7