Before You Call For Service - Monogram ZVB30 Owner's Manual

Save time
and money!
Review the
troubleshooting
tips on this page
first and you
may not need to
call for service.
8
PROBLEM
FAN DOES
NOT WORK
VENT DOES
NOT WORK
POSSIBLE CAUSE
• The vent is not fully extended . Press the ON/OFF pad .
• The vent is not plugged into an outlet . Plug the vent into a 120V
power outlet .
• The raise/lower pad did not engage the lift motor . Hold down the
pad for a couple of seconds to activate the motor .
• The circuit breaker may have tripped . Check the circuit breaker—
reset if necessary .

Before You Call For Service...

Downdraft Vent System