System Configurations - Wolf BWL-1 S Installation And Operating Instructions Manual

BWL-1S(B)
● Split air/water heat pump
● Cylinder in series
● One heating circuit
● DHW heating
● Active cooling possible (in conjunction with an additional 3-way diverter valve for cooling)
Outdoor module
Important information:
In this schematic diagram, shut-off valves, air vent valves and safety equipment are not fully represented.
These should be provided for each individual system, in line with the applicable standards and regulations.
Hydraulic and electrical data can be found in the Hydraulic System Solutions technical guide.
66
System configuration 01
DHW cylinder
CTS
Indoor module
A 3-way diverter valve for
central heating/DHW and a
feed/heating circuit pump
are integrated into the
indoor module
Heating circuit
Cylinder in series
In conjunction with
active cooling
3064298_201507