Parameters - Wolf BWL-1 S Installation And Operating Instructions Manual

31.3 Parameters

Main menu
Chapter
Password for contractor level
3064298_201507
31. Contractor level
Under the menu item Contractor, turn and press the controller to access the
"Parameters" submenu. Here, the contractor can change the system's factory
settings.
Incorrect settings may result in malfunctions and damage to the system.
Also observe the information / settings in the installation instructions "AM display
module for the contractor".
If a parameter is not available, it will not be shown on the display.
Submenu
Contractor
← back
Relay test
System
Parameter
Parameter reset
Menu item
Parameter
WP001 01
WP002 none
WP003 none
System configuration
WP001
01
Parameter
WP001 01
WP002 none
WP003 none
59