Wolf BWL-1 S Installation And Operating Instructions Manual page 17

Transport to the installation site
3064298_201507
8. Siting the BWL-1S(B)
To prevent damage during transport, the heat pump must remain packaged and on its
wooden pallet while being transported to the final installation site by pallet truck.
Only transport the heat pump by pallet truck while packaged.
Caution, risk of tipping.
To prevent damage to the appliance, the heat pump's outdoor module
must not be tilted more than 45° during transport.
The components, in particular the plastic casings and the pipework for
the refrigerant circuit and heating side, must not be used to transport
the appliance. Only use the grab handles provided when transporting
the heat pump.
Bear in mind the weight of the heat pump.
Observe the "Instructions" on the packaging.
Please note
17