Safety Information, Standards And Regulations - Wolf BWL-1 S Installation And Operating Instructions Manual

Safety instructions
Standards / Regulations
3064298_201507
1. Safety information,
standards and regulations
The following symbols are used in this description to highlight important
information concerning personal and operational safety:
Denotes instructions with which you must strictly comply to prevent risk or injury to
individuals, faults or damage to the appliance.
Danger due to live electrical components.
Caution: Turn off the ON/OFF switch before removing the casing.
Never touch electrical components or contacts when the ON/OFF switch is in the ON
position. This carries a risk of electrocution that could result in injury or death. The
terminals are live even when the ON/OFF switch is in the OFF position.
Indicates technical instructions that must be observed to prevent malfunction
Please note
or appliance damage.
This appliance is not designed to be operated by persons
(including children) with restricted physical, sensory or
mental capacities or who lack the necessary experience
and/or knowledge, unless they are supervised by a
person responsible for their safety or have received
instructions on how to use the appliance from this person.
The appliance and control accessories comply with the following regulations:
EC Directives
2006/42/EG Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
DIN EN standards
DIN EN 349
DIN EN 378
DIN EN 12100
DIN EN 14511
DIN EN 60335-1
DIN EN 60335-2-40
DIN EN 60529
DIN EN 60730-1
DIN EN 55014-1
DIN EN 55014-2
National standards / directives
DE:
DIN 8901
BGR 500 Part 2
VDI 2035 Part 1-3
Drinking water ordinance
CH:
NEV (SR 743.26)
Certificate of competence
The handling of refrigerant and work on the refrigerant circuit must be carried
out by a refrigeration engineer or other suitably qualified person, such as a
heating contractor with a certificate of competence (to para 5, section 3 of the
ChemKlimaschutzV [or local regulations] in conjunction with (EC) Regulation
No. 303/2008 Category I). Applicable standards and regulations and recognised
engineering standards must be observed.
5