Alarm Lock Trilogy DL4100 Programming Instructions Manual page 22

PRINTER
Hold the printer perpendicular to the Lock's infrared LED as shown in Figure 1 and Figure 2. If the
printer has been idle for some time, press the paper feed button to wake up the printer.
55. Print Audit Trail
Hold the printer over the lock's infrared sensor as shown in Figure 1 and Figure 2 above.
Twenty (20) events will print at a time; press 1 for more events, or 9 to quit. To abort
printing, press any key for 3 seconds (three short beeps will sound).
56. Print User Code List
Hold the printer over the lock's infrared sensor as shown in Figure 1 and Figure 2 above.
To abort printing, press any key for 3 seconds (three short beeps will sound).
57. Print Clock Settings, Software
Version and Door Number
Hold the printer over the lock's infrared sensor as shown in Figure 1 and Figure 2 above.
DOWNLOADING
58. Upload/Download PC Data
For use with DL-WINDOWS software, refer to OI237. AL-PCI interface cable is needed.
V _ _ _
22
Programming Functions (cont'd)
QQ 1^0 6^1 lied
I^Q
1^3 1^3 1^3 1^3
Infrared
LEI
DL4100 to Printer - Front View
F ig u re 2
1
1
1^3 1^3
- J