Alarm Time Setting; Advance Setting; User Management - Wansview NCH-532MW User Manual

http://www.wansview.com

5.3.4 Alarm Time Setting

The device will trigger the alarm only during the armed time period.
Note: Please make sure your system time is correct before you set the alarm time period.
Please refer to 5.5.2 to set system time.

5.4 Advance Setting

5.4.1 User Management

There are 3 levels of user authorization.
Administrator："admin" has the highest authority. It can do any settings. Factory
default password: 123456
User: user can only operate the device but can't do any setting changes. The default
password is user
Guest: User can view the video, but can't operate the device. The default password
is guest
Note: Please change these 3 level passwords when your first use to ensure your safety.
Figure 21
Figure 22
17