Related Manuals for Bofan PT502
Summary of Contents for Bofan PT502
-
Page 1: User Manual
Super Mini Vehicle Tracker PT502 User Manual Please read carefully before operation www.bofan.cc... -
Page 2: Product Overview
Qualified Service: Only qualified person can install or repair PT502 Water Resistance: PT502 is not water resistance. Keep it dry. Install it inside the vehicle. Confidential Phone Number: For safety reason, don’t tell other people the SIM card number of your PT502 without taking precautions of security settings. -
Page 3: Getting Started
● Maximum upload speed is 21.4kbps Dimensions (cm) x 7.0 x 2.4 3 Getting started This section will describe how to set up your PT502 Please follow the specifications as below. Bofan is not liable for damage to the PT502 caused due to user error. - Page 4 3.1 Hardware and Accessories PT502’s standard package includes: • 1* PT502 Main Unit • 1* GPS Antenna • 1* GSM Antenna • 1* Plug-in power wires Optional accessories: • Relay (Optional, for cutting off oil/engine to stop car, 12V relay for car, 24V relay for truck) •...
- Page 5 Ignition Detection - Input 4 ACC wire on PT502 Ignition Note: When connecting PT502’s ACC wire to ACC, you can set to save GPRS cost when ignition OFF. Please reference the below example of setting GPRS time interval : 000000GTI30,0,0,0,240. For Output Ports...
- Page 6 Note: 000000 is the tracker defaulted password, if you already changed your tracker password, please use your new password. Please don’t use this feature while car/vehicle with high-speed driving, and we suggest connect relay with fuel control line in your car, Bofan is not liable for any traffic accidents. For Analog Input Connect fuel sensor or temperature sensor refer to above picture.
-
Page 7: Start Tracking
Tracker replies SMS with coordinates: When you want to know the PT502 location, you can call the SIM card number in PT502 or send a SMS command to PT502 from your mobile, after some seconds, it will reply a SMS with the position Lat & Log data to your mobile. - Page 8 If you want to do live tracking on platform, you need strictly set tracker ID, server, Port, APN and time interval for PT502 as per below steps 4.2.1~4.2.5. Firstly please ensure that your SIM card in PT502 supports GPRS connection prior to setting...
- Page 9 (notes: please go on next step after you already get the confirmation SMS for last step. PT502 will only reply command from a user which uses the correct password. Commands with wrong Password are ignored.) 4.2.2 Set ID for PT502...
- Page 10 4.2.5 Set Time Interval for Sending GPRS Packet SMS Example: 000000GTI30 Then PT502 will report data by GPRS to server every 30 seconds. We suggest time interval >= 30 seconds. Time interval should not exceed 65535 seconds We suggest set report time interval simply as above example when testing initially.
-
Page 11: Sms Command List
SMS reply: Center: Nigang West Road Side Rd,Futian,Shenzhen,Guangdong,China (Note: tracker can only reply the detail address in English) PT502 will only reply command from a user which uses the correct password. Command with wrong password is ignored. --Set Mileage Alert to remind you maintain your car The SMS command of setting Mileage alert is: <password>MLA<base mileage>,<increment>... - Page 12 SOS button PT502. Max 16 digits. Maximum 3 SOS numbers can be set. If only set the 1st number, PT502 will send SMS and then call to this first number after pressing SOS button. If set the 2nd or 3rd numbers too,...
- Page 13 TMZ=Time Zone Set time zone Time from -13 to 13 difference Example: 000000TMZ8 <password>RST<Type> RST=Restart Restart Type=0 or null, to reboot PT502 Type=1, to reboot GPS Type=2, to reboot GSM <password>DFT DFT=Default Reset PT502 to default <password>RPO RPO=Request Power Voltage Request Power <password>CPA<Value>...
- Page 14 =0, do not call the preset SOS phone number Default value: 000000SALIN1111 000000SALIN4000 Example: 000000SALIN1111 That means, when input 1(SOS key) is pressed, PT502 will have SOS alarm on platform, send alarm SMS to SOS number, call to SOS number.
- Page 15 Fuel Low alarm SMS to SOS number when tracker get AD data <10%, but this alarm is effective only when ACC on (if you connect PT502 ACC to car ignition, then it means car ignition on). Note: if your fuel sensor keep working even when car ignition off, you don’t need to set index2 as 4 at here.
- Page 16 SIM card provider) <password>SVR<domain>,<Port> Domain: the tracking platform domain Set Server name Port: 8502 (Fixed for PT502 when working on our tracking system) <password>GTI<Time Interval>,<Distant GTI=GPRS Time Interval Set Time Interval (for report data to Interval>, <Angle>,<reserved>...
-
Page 17: Troubleshooting
Problem: Reply SMS starts with ‘Last…’ Possible Cause: Resolution: PT502 does not have clear view of the sky Move the antenna of the unit to a location where the sky is visible. PT502 is indoor Make it work in an open area outside... - Page 18 Tracker ID set by SMS command is not Check if the tracker ID you set into device is same as that one written in software same exactly as the one you write in software. Welcome to contact your sales representative in our company or by email bofanelectronics@gmail.com...