Sms Command List - Bofan PT502 User Manual

Now back to LiveGTS and go to "Real-time" page, select your tracker ID, you will see your tracker on the
map. All above settings are basic steps to connect to the software.
After PT502 connects to server successfully, you can also:
--Get street address by SMS request
The tracker must work on the LiveGTS successfully and got good GPS&GPRS signal.
Then you can send the SMS command to get the detail address instead of latitude and longitude.
Command: <password>RCA
SMS Example: 000000RCA
Notes: The default password of tracker is 000000.
SMS reply: Center: Nigang West Road Side Rd,Futian,Shenzhen,Guangdong,China
(Note: tracker can only reply the detail address in English)
PT502 will only reply command from a user which uses the correct password. Command with wrong
password is ignored.
--Set Mileage Alert to remind you maintain your car
The SMS command of setting Mileage alert is:
<password>MLA<base mileage>,<increment>
SMS Example: 000000MLA100000,50000
This example means, if the tracker records the car driving more than 10000km, tracker will send one
Mileage Alert for each 5000km mileage increments.
This Mileage Alert can be sent to your mobile by SMS if you set your mobile number as SOS number for
this tracker installed in car.
This Mileage Alert can be also sent to your email address if you set your email address in software
successfully.
Note: only PT502 in version 1.17 above supports this Mileage Alert feature, if your PT502's firmware is
lower than 1.17, please contact your sales representative to help you check and upgrade the firmware.

5 SMS Command List

(Remarks: the device password is 000000 as default)
Description
Get current location
-
unit: 100 meters
Command
<password>RCP
www.bofan.cc
Remarks
RCP=Request Current Position
Get current location's latitude and
longitude of PT502
10