Bofan PT502 User Manual page 14

Output Control
(usually for stop car
remotely via extra relay)
Set Alarm
Different alarms can be
set at the same time, just
use "," between different
alarms, please refere to
below example details for
ignition on/off alarm.
-
<password>OPC1,<Action>
<password>SAL<Alarm><Index1><Inde
x2><Index3>
www.bofan.cc
OPC=Output Control
Action=0,to close the output
=1,to open the output
SAL=Set ALarm
Alarm =IN1, for input1(SOS alarm)
SPD, for over speed alarm
GEO, for geo-fence alarm
MLA, for Mileage Alarm
SKA, for shake alarm
LPA, for low power alarm
IU4, for input4/ACC up
(any alarm command)
Index1=1, to alert on platform
=0, do not alert on platform
Index2=1, to send alert SMS
=0, do not send alert SMS
Index3=1, to call the preset SOS
phone number
=0, do not call the preset SOS
phone number
Default value:
000000SALIN1111
000000SALIN4000
Example: 000000SALIN1111
That means, when input 1(SOS key)
is pressed, PT502 will have
SOS alarm on platform, send
alarm SMS to SOS number,
call to SOS number.
13