Bofan PT502 User Manual page 12

Get street address by
SMS request
Get Google map link by
SMS request
Set password
Reset password when
the previous password
is forgotten
Set preset phone
number for SOS button
Set Over Speed
Alert
When car speed is higher
than the preset value,
PT502 will send an alert
SMS to the preset SOS
number.
-
<password>RCA
<password>RCM
<password>PWD<new password>
000000RPW<new password>
<password>SOS,<SOSNumber1>,<SO
SNumber2>,<SOSNumber3>
<password>SPD<Max Speed>
www.bofan.cc
RCA = Request Current Address
Note: this command is only valid
when tracker is connecting to server
by GPRS successfully and GPRS
signal under stable status.
RCM = Request Current Map
(this command is still valid even don't
config PT502's GPRS connecting )
PWD=Password (must be 6 digits)
RPW=Reset Password
Please long press the SOS button
when you send this command to
PT502
(Password must be 6 digits)
SOS Number: Preset phone number
to receive phone call or SMS from
PT502. Max 16 digits. Maximum 3
SOS numbers can be set.
If only set the 1st number, PT502 will
send SMS and then call to this first
number after pressing SOS button.
If set the 2nd or 3rd numbers too,
PT502 will send SMS to all 3
numbers, only call to the 1
after pressing SOS button.
Note: <password>SOS, command is
for cancel all pre set numbers.
SPD=Speed
Max Speed (the preset speed value)
=0,to turn off this function
=[0,500](unit: Km/h)
Example: 000000SPD80 it will send
alert when it is over 80Km/h
st
number
11