Getting Started - Bofan PT502 User Manual

encountering such problem.
Each signal sent out from the system will be confirmed for successful transmission in the
base station of the mobile operator. However, if system stoppage occurs or if the mobile
telephone is preset to a switch off state by the customer, it cannot ensure successful
transmission.
2 Parameters of PT502
Feature
Power Supply
Power Consumption For
VBATT
Operating Temperature
Range
Storage Temperature
Range
Humidity
External Antenna
External SIM Card
SIM card type
Transmit Power
Sensitivity
Speech Codec
GPRS
Dimensions

3 Getting started

This section will describe how to set up your PT502
Please follow the specifications as below. Bofan is not liable for damage to the
PT502 caused due to user error.
-
Characteristics
+9V to +40V
Active mode(peak) < 1.0A
Active mode(avg.) < 300mA
Idle mode < 50mA
-20℃ to +60℃
-20℃ to +70℃
Up to 75% non-condensing
Connected via the 50Ω coax connector
Connected via SIM Card connector
3V
Class 4(2W) for E-GSM 900 and 850
Class 1(1W) for DCS 1800
Class 1(1W) for PCS 1900
-104 dBm minimum for E-GSM 900 and 850
-102 dBm minimum for DCS 1800
-102 dBm minimum for PCS 1900
Triple rate Codec:
Half rate –ETS 06.20
Full rate –ETS 06.10
Enhance Full rate-ETS 06.50/06.06/06.08
Multi-slot Class 8(4Rx, 1Tx, 5 slot Max.)
Support all 4 coding schemes(CS-1, CS-2, CS-3
and CS-4)
● Maximum download speed is 85.6kbps
● Maximum upload speed is 21.4kbps
7.4 (cm)
x 7.0 x 2.4
www.bofan.cc
2