Bofan PT502 User Manual page 5

connect antennas and wires
Second,
connect the GSM Antenna
For Input Ports
Ignition Detection - Input 4
Ignition
Note: When connecting PT502's ACC wire to ACC, you can set to save GPRS cost when ignition
OFF. Please reference the below example of setting GPRS time interval : 000000GTI30,0,0,0,240.
For Output Ports
Engine Cut (optional)
-
connect the GPS Antenna
Red line: connect to positive pole of car battery
Black line: GND, one connect to cathode of car battery
the other connect to SOS key
White line: connect to SOS key
Blue line: connect to AD for fuel sensor or temperature
sensor
Yellow line: connect to ACC for saving GPRS cost
Green line: connect to optional relay for engine cut
ACC wire on PT502
www.bofan.cc
connect the wires
4