Setting Up And Handling Three Way Calls; Setting Up A Three Way Call; Holding And Resuming Three Way Calls; Ending Three Way Calls - Polycom VVX500 User Manual

Setting up and handling three way calls

You can set up a three way call with two other parties.
Just as with other calls, you can hold and resume these calls. In addition, you'll have the option to split a three way call, end
the call and place the people you were talking with on hold.

Setting up a three way call

There are two ways to set up a three way call: the conventional way —by calling two people and using the Confrnc soft key
— or joining two existing calls using the Join soft key.
To set up a three way call:
1. Call the first person
2. From Lines or Calls view, press More and then Confrnc. The active call is
held.
3. Using the Dialler, call the second person
4. When the second person answers, press More and then Confrnc. to join
everyone in a conference. The Active: Conference screen displays, as shown
next

Holding and resuming three way calls

When you place a three way call on hold, you place the other two people in the call on hold. No one in a held three way call
can hear each other.
To place a three way call on hold:
From Lines or Calls view, press Hold. If you're in Calls view, be sure to
highlight the conference first. The other two people in the call are held. The
following example shows a held three way call in Calls view.
To resume a held call:
From Lines or Calls view, press Resume

Ending three way calls

To end a three way call, and your connection to the other people, press End Call. By default, when you press End Call, the
other two people remain connected.
To end a conference call:
From Lines or Calls view, press End Call.
Flip Solutions Ltd t/a Flip Connect
Phone: 020 3056 5060 | Fax: 0870 421 5411 | E-Mail: sales@flipconnect.co.uk
User Guide | Polycom VVX500 | 30/06/2014
8