Installing The Ink Cartridges - Roland VersaCamm VS-640 Setup Manual

Installing the Ink Cartridges

Be sure to follow the on-screen instructions
for insertion and removal.
 Insert and remove slowly, one at a time.
 Insert firmly, as far as it will go.
 Insert the cartridge straight down from the top.
Label
surface
During cleaning, you need to insert and remove cartridges several times. The on-screen messages tell you
when or which cartridge to be inserted or removed.
The SOL INK cleaning cartridges are not differentiated by color.
Insert each color ink cartridge into the slot labeled with the matching color. If you insert wrong car-
tridges when filling ink, the condition cannot be restored easily. Contact your authorized Roland DG
Corp. dealer, if you filled ink with wrong cartridges inserted.
CAUTION
1.
Switch on the power and make the initial settings.

Never insert your hand or fingers into the opening of the front cover.
The print heads move at high speed inside the cover. Contact may cause
injury.
5. Installing the Ink Cartridges
Close the front cover.
Slot number
31