Roland VersaCamm VS-640 Setup Manual page 36

5. Installing the Ink Cartridges
y
Retainer
Align the projection of the
retainer with the groove in
the cartridge slot.
34
Insert the retainers to the slots 3 and 4.
As paying attention to the orientation of the round hole,
insert the dummy cartridges to the slots 3 and 4.
Insert the dummy cartridge straight as far as it goes.
Remove the retainers as holding the dummy cartridges with
one hand so that they will not come off.
In the same way, insert the dummy cartridges to the slots 5 and
6 and the slots 7 and 8 by repeating the steps
Press
Dummy Cartridge
How to attach the retainer
Hold it with both hands and
push it down with sufficient
force along the groove.
Push the retainer from the top.
If you hold the lower part of the
retainer when installing, you
may get your fingers pinched
due to installing force.
.
Round hole
CAUTION
to .
Installation is
completed.