Performing Heads Cleaning - Roland VersaCamm VS-640 Setup Manual

y
Label
surface
z
E M P T Y
D R A I N B O T T L E
F I L L I N G I N K . . .
> > > > > > > > > > > > >
4.

Performing Heads Cleaning

This operation may take about 5 minutes. Stay near this machine during that time and complete the
operation according to the instructions shown on the screen. Never leave the machine midway in clean-
ing operation. It may damage the print heads and operation of the machine may become impossible.

Insert the ink cartridges of the respective colors.
Discard the discharged ink in the drain bottle.
Be sure to discard. If not discarded at this step, the discharged ink will
overflow.
Attach the drain bottle and press
Insert the supplied hexagonal wrench in the hole shown in the
figure below, and turn it to the direction of the arrow.
The valve closes.
Wait for the next instruction.
5. Installing the Ink Cartridges
Insert into the slot of the
matching color.
Hexagonal
Wrench
.
37