User Interfaces; Line Key Led - Yealink SIP-T23G User Manual

LED Status
Slow flashing green
Off
Line key LED (configured as a BLF key or BLF List key)
LED Status
Solid green
Fast flashing red (200ms)
Solid red
Slow flashing red (1s)
Off
Note
The above introduces the default LED status. The statuses of the power indicator LED and
BLF key are configurable via web user interface. For more information, refer to
Yealink_SIP-T2_Series_T4_Series_IP_Phones_Administrator_Guide.
Two ways to customize configurations of your SIP-T23P/T23G IP phone:
The user interface on the IP phone.

The user interface in a web browser on your PC.

The hardware components keypad and LCD screen constitute the phone user interface,
which allows the user to execute all call operation tasks and basic configuration
changes directly on the phone. In addition, you can use the web user interface to
access all configuration settings. In many cases, either the phone user interface and/or
the web user interface interchangeably. However, in some cases, it is only possible to
use one or the other interface to operate the phone and change settings.
Description
The call is placed on hold.
The line is inactive.
Description
The monitored user is idle.
The monitored user receives an incoming call.
The monitored user is busy.
The monitored user's conversation is placed on
hold (This LED status requires server support).
The call is parked against the monitored user's
phone number.
The monitored user does not exist.
Overview
5