User Preference Settings - Fisher & Paykel DW60CH Installation Instructions Manual

USER PREFERENCE SETTINGS - CH & CHP MODELS
These allow you to:
Adjust the Rinse aid level.
● ●
Turn the Beeps on or off.
● ●
To adjust the Rinse Aid level
1 Press to turn the dishwasher on.
2 To enter the User preference settings, press and hold Delay and
The display shows the current Rinse Aid setting (the default is
● ●
CH model: The Heavy indicator will flash and the Normal indicator will be steadily lit.
● ●
rA4
CHP model: The Auto indicator will flash and the Heavy indicator will be steadily lit.
● ●
rA4
3 Press Delay to change the Rinse Aid setting in steps between
rA7
and (maximum dispense).
4 To exit the Rinse Aid menu, press
20
.
together until:
rA6
).
rA1
(minimum dispense)