Plumbing -- Waste connection
These drainage options are designed to eliminate problems that occur with combined
sink-dishwasher waste systems.
Drainage option A: Separate sink and dishwasher waste systems
The standpipe must have a minimum diameter of 38 mm and stand 750 mm above the
●
●
floor.
Use the supplied drain hose support to hold the drain hose in place in the standpipe.
●
●
IMPORTANT!
We do not recommend connecting the drain hose or drain pipe directly to a built-in
waste disposal unit.
min.
120
min.
mm
750 mm
min.38 mm
min.
Power outlet with
120
min.
mm
disconnection switch
750 mm
min.38 mm
Drainage option B: Combined sink and dishwasher waste systems
When connecting the drain hose to a sink trap with a drain hose spigot, make sure
●
●
that the drain hose is supported to the height of the bench.
Ensure the drain spigot has a minimum hole diameter of 15 mm and it has been drilled
●
●
out.
Power outlet with
disconnection switch
INSTALLATION INSTRUCTIONS
Hose supplied
min.
750 mm
Hose supplied
Waste disposal
unit (optional)
min.
750 mm
min. 200 mm
Ensure drain hose is supported to
height of bench
Vent
Waste
Water
min. 200 mm
Waste
Water
Waste
11