Table of Contents
Advertisement
These allow you to:
Change the rinse aid setting or turn rinse aid on or off.
z
z
Turn the beeps on or off.
z
z
Turn the cavity light on or off (DW60U6I models only)
z
z
Turn the floor light on or off (DW60U6I models only)
z
z
To change the rinse aid setting
1 Open the door to turn the dishwasher on.
2 Touch and hold
display will show the current Rinse Aid setting.
Rinse flashes when in preference option mode.
z
z
3 Touch
to scroll between
rA-
(rinse aid off).
4 Touch Rinse to move on to the next setting or touch and hold
exit the user preference menu.
To turn the Beeps on or off
This turns off all sounds on the dishwasher (except for fault alerts).
1 Make sure the dishwasher is on.
2 Touch and hold
menu. The display will show the current Rinse Aid setting.
3 Touch Rinse to scroll to the Beeps menu.
4 Touch
to toggle between
5 Touch and hold
USER PREFERENCE SETTINGS
and Rinse until a beep sounds to enter the user preference menu. The
rA1
(minimum dispense) to
and Rinse together until a beep sounds to enter the user preference
bPo
(Beeps On) and
until a beep sounds to exit the user preference menu.
rA6
(maximum dispense) or
until a beep sounds to
bP-
(Beeps Off)
9
Advertisement
Table of Contents
