Table of Contents
Advertisement
CONTROLS AND STARTING A WASH - CK MODELS
To start a wash programme
1 Press and hold
2 Check that the wash programme displayed is the one you would like to use. If not, see
section 'Changing the wash programme.'
3 Once the display shows the programme you would like to use, press
display will show the approximate time remaining and the stage of the wash.
Note: the dishwasher will remember the last programme used.
To pause and restart a wash programme
1 Press
to pause the programme. The programme status (eg 'Wash') will flash while the
dishwasher is paused.
2 Open the door very slowly.
IMPORTANT!
There is a risk of being sprayed with hot water. Do not fully open the door until the
spray arms have stopped rotating.
3 Load, remove, or rearrange any dishes if needed.
4 Press
to restart the programme.
If the dishwasher is not restarted within 7 minutes, it will then beep every few seconds
until the cycle is restarted.
Changing the wash programme
Note: The dishwasher will remember the last programme used.
WASH PROGRAMME
Auto
Heavy
Normal
Normal Eco
Fast
Gentle
Hygiene
Rinse
1 Press
to turn the dishwasher on.
2 Press Program to scroll to the desired wash programme.
The display will show the wash programme time.
●
●
3 Select a wash option (optional)
Press the 'Options' buttons to scroll between 'Intensive', '1/2 Load' or off
●
●
(see 'Selecting Wash options').
4 Press
to start the wash programme.
At the end of the programme the dishwasher will beep. The Clean indicator will remain
lit and the display will show
to turn the dishwasher on.
DESCRIPTION
Senses the optimal wash programme for your dishes
A wash for heavily soiled dishes
A wash for your everyday dishes
Helps you save energy and water for normal
soiled use
A fast wash for lightly soiled dishes
For all your heat sensitive dishes
A wash for sanitising your dishes
Prevents food from drying on dishes
0
. After 30 seconds the display will turn off.
to start. The
23
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
