Fault Codes - Fisher & Paykel DW60CH Installation Instructions Manual

If the dishwasher malfunctions, it will display a fault code and beep. Check the table
below to see if you can correct the fault yourself before contacting Fisher & Paykel
Customer Care.
If the dishwasher still will not work, or shows any other fault code
1 Press to turn the dishwasher off and wait a few minutes.
2 Press again to turn the dishwasher back on.
If the dishwasher still does not function and/or the problem persists, disconnect the
dishwasher from the power supply, turn the water supply off, then contact Fisher &
Paykel Customer Care with the fault code information.
42

FAULT CODES