Troubleshooting - Fisher & Paykel DW60CH Installation Instructions Manual

PROBLEM
The dishwasher
stops suddenly
during the wash.
Knocking or
rattling sound
during wash.
Unclean dishes.
Plastic items
are discoloured
(e.g. stain left by
tomato sauce).
Display flashing
while Keylock is
on.

TROUBLESHOOTING

POSSIBLE CAUSE
Power or water supply has
been interrupted.
Spray arm knocking
against dishes.
Dishes have been stacked
incorrectly.
Wash programme
unsuitable for load.
Soils were too heavily
baked on.
Spray arm(s) unable to
rotate.
Dishwasher overloaded or
incorrectly loaded.
The filters are incorrectly
inserted.
Detergent put in the wrong
compartment.
Excessive food not
removed from dishes
before loading.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are
blocked.
The filters are blocked.
Not enough detergent, not
pre-rinsed.
This is normal. The display
remains on although the
buttons are disabled.
WHAT TO DO
Check the power and water supplies.
Pause the wash and rearrange dishes.
See sections 'Controls and starting a
wash' and
'Loading'.
See section 'Wash programmes and
detergent quantities' and select a
suitable programme.
Dishes may need soaking.
Ensure no items are obstructing the
spray arm path.
See the 'Loading' section.
See section 'Care and cleaning'.
See sections 'Wash programmes and
detergent quantities' and 'Adding
detergent'.
Scrape all food scraps off dishes
before loading.
Only use powdered or tablet detergent
designed for domestic dishwashers.
See 'Wash programmes and detergent
quantities' for recommended
quantities. You
may need to adjust these to suit your
particular load and the hardness of
your water supply.
Clean the spray arm(s). See 'Care and
cleaning' for instructions.
Clean the filters. See 'Care and
cleaning' for instructions.
Pre-rinse plastic dishes before placing
in the dishwasher and/or add more
detergent.
Alternatively, using the Rinse
programme after adding dishes may
minimise staining.
No action required.
45