Preference Options - Fisher & Paykel DISHDRAWER DD60DDF 9 Series Quick Start Manual

EN
You can change the setting of these options to suit your preferences or circumstances.
We recommend selecting the most suitable settings before you start using
your dishwasher.
OPTION
Rinse aid
Water softener
(some models only)
Open drawer auto
power-on
(suitable as a
Sabbath option)
Turn tones off
Closed drawer
autolock
How to change the setting of an option
1 CHECK
Check that there is no wash underway, then open the drawer.
2 ENTER MENU
To enter the menu: Press and hold the
You are now in the Rinse aid option of the preference options menu.
●
To change the Rinse aid setting, go to step 4 now.
●
3 SCROLL TO OPTION
Press to scroll to the next option. The wash modifier indicators will display which
option is selected (see table below).
When you have scrolled to the end of the sequence, the menu will start again with
Rinse aid.
4 CHANGE SETTING
Press to change the setting within an option.
The wash program indicators will display which setting is selected (see table below).
5 SAVE SETTING & QUIT MENU
Press to save the new setting and quit the preference options menu.
Double models only:
You can use either drawer to change the settings. Changing the settings in one tub will
set your preferences for the whole dishwasher.
8

PREFERENCE OPTIONS

WHAT DOES IT DO
Regulates the amount of rinse aid dispensed. Reduce this setting if there is
excess foam after a wash. Increase this setting if dishes are wet or streaky after
a wash.
Refer to the 'Water softener' section of the 'User guide' for details.
Your dishwasher is factory-set to automatically power on for 30 seconds
whenever you open the drawer. You can turn this setting off.
This turns all tones off except for fault alerts.
When this setting is on, the drawer will automatically lock 30 seconds after it's
closed. It can then be unlocked by pressing and holding
door. Useful in boats or motor homes.
and together for four seconds.
on the dishwasher