How To Set The Unit; Control Panel; Main Function - ACME CM-150 PAGEANT 150 User Manual

3. How To Set The Unit

3.1 Control panel

Display:
To show the various menus and the selected functions
LED:
DMX
MASTER
SLAVE
SOUND
Button:
MENU
DOWN
UP
ENTER
Only for remote control:
Connecting with CA-8/ CA-9RTX to control the unit for Stand by, Function and Mode function.
Mains input:
Connect to power supply.
Mains output:
Connect to supply power to the next unit.
DMX input/output:
For DMX512 link, use 3/5-pin XLR cable to link the unit together.

3.2 Main Function

To select any of the given functions, press the MENU button up to when the required one is showing on
the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to
change the mode. Once the required mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button again. Hold and press the MENU
button about one second or wait for one minute to exit the menu mode.
The main functions are showing below:
On DMX input present
On Master Mode
On Slave Mode
Flashing Sound activation
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
4A