Muting The Microphone; Using Do Not Disturb; Adjusting Volume; Handling Video Calls - Polycom VVX 500 User Manual

Polycom® VVX® 500 and 600 Business Media Phones user guide
Tip:
Accessing your message
centre
Tap from Lines, Calls, or Active
Call view.

Muting the microphone

During a call, press so other parties
can't hear you. To disable Mute, press
again.

Using Do Not Disturb

If you have a service that supports Do
Not Disturb, you can enable or disable
ringing. To enable or disable ringing, tap
DND from Home or Lines view. When Do
Not Disturb is enabled, the DND icon,
, displays in the status bar. If you have a
VVX 600, you can tap to disable DND

Adjusting volume

To change call volume, press
during a call. To change the ringer
volume, press when the phone
is idle or ringing.

Handling video calls

Your phone may be set up to receive
video. If a Polycom® VVX® Camera
(Provided by Shaw Business) is attached
to your phone, you can send, as well as
receive, video. You can exchange video
with only one person at time.
If video is enabled on your phone,
you can:
• View video on the full screen—Tap
To exit full screen mode, tap
icon doesn't display, tap the screen to
see it.)
If a VVX Camera is attached to your
phone, you can tap Video and do the
following:
• Tap Stop Video to stop sending video.
To start sending video again, tap Start
Video.
SHW_BIZ_HPBX_500SERIES_GUIDE_JUL15
• Tap Swap to switch where video
displays.
To stop sending video for all calls:
• Tap Settings from Home view, and tap
Basic > Video > Video Call Settings.
Tap Auto Start Video Tx, and disable
the setting. When disabled, your
phone won't automatically transmit
video at the start of all calls.
To automatically view all incoming
video on the full screen (if you have a
camera or not):
• Tap Settings from Home view, and tap
Basic > Video > Video Call Settings.
Tap Auto Video Full Screen, enable the
setting, and tap Save.
.
. (If the