9-14
POWER TRIM AND TILT
OPERATION
The power trim and tilt system is operated by a "rocker" type switch (protected by a rubber thumb pad) on top
of the remote control box handle.
When the switch is depressed, power is delivered to the electric motor via the relevant relay. The relay with the
Blue wire connected to the PTT pump is for trim/ tilt "up", while the relay with the Green wire is for trim/tilt
"down".
COMPONENTS
Oil reservoir
PTT motor
Check valve
"DOWN" relief
valve
Spool valve
"DOWN" pressure
main check valve
Oil filler cap
Manual release valve
Tilt rod
PTT cylinder
Check valve
Piston
Free piston
Gear pump
"UP" pressure main check valve
"UP" relief valve
Upper cylinder chamber
Lower
cylinder
chamber