10-2 LOWER UNIT
REMOVAL & DISASSEMBLY
Before removing lower unit:
• Disconnect spark plug caps from all spark plugs.
• Disconnect the battery cable.
Loosen the clutch rod lock nut 1.
To separate the clutch rod from the shift rod, unscrew the turn-
buckle 2.
Remove six(6) bolts 3 and separate gearcase 4 from driveshaft
housing.
Place a drain pan under the oil drain plug.
Remove oil drain plug first 6 then oil level plug 5 and allow
gear oil to drain.
Remove bolt and trim tab 7 (if necessary).
Remove cotter pin 8 from propeller nut and remove propeller
nut 9.
Remove washer 0, spacer A, propeller B and stopper C from
the propeller shaft.