Reboot The Terminal; Working Mode Setting - Concox GT300 User Manual

If GPS is located, it will reply google link of current longitude and latitude. If not located within 2 mins, it will rep
ly google link of the latest longitude and latitude:
e.g. Google link reply
<DateTime:10-11-23 23:42:51> http://maps. oogle.com/maps?q=N22.571490,E113.877103
If GPS has never been located before, it will reply SMS after 10mins "GPS is fail to locate, no data, please try aga
in!"
(4) Check platform
The terminal will send position information to the platform server timely. The user can check the position on the
platform.
The platform website: www.cootrack.com
Please contact your dealer for the login methods and operations.

5.8 Reboot the terminal

Send SMS command: RESET#
When terminal gets command, it will reboot after 1 min.

6 Working mode setting

6.1 Model1: Locating in a regular time interval mode
After turned on and sent the first GPS location, the terminal will activate GPS in 30mins. If located, it will send
location to platform and turn off GPS automatically. If fail to locate, then GPS will turn off and send LBS location.
Send SMS command: mode,1#
6.2 Model2: Locating according to vibration mode (default)
In this mode, the terminal will turn on GPS as default.
If GPS locates, the terminal will send first GPS location to the platform. If GPS could not locate, it will upload
LBS location.
In this mode, if the terminal does not detect any vibration, GPS will be off. And after it detects vibration, it will
start working again.
Send SMS command: mode,2#
6.3 Mode3: Locating according to command
In this mode, the terminal will be in Deep Sleep mode. It will not connect with the platform. You can send SMS