Related Manuals for Concox GT300
Summary of Contents for Concox GT300
-
Page 1: User Manual
User Manual (Version 1.1E) Please read this manual carefully before attempting installation and online activation. Pictures are for indication and illustration purposes only. -
Page 2: Inside The Box
Introducing Your GT300 Learn about your device's layout, indications and specifications. 1 Inside the Box Pictures are for indication and illustration purposes only. NOTE: After opening the packing box, please check if the accessories are complete. If there is anything missing,... - Page 3 2 GT300 Overview 2.1 Introduction...
-
Page 4: Led Indication
2.2 LED Indication Power/working status indicator (red) Status Indication Quick flashing (interval 0.3s) Low battery Slow flashing (interval 2s) Fully charged Slow flashing (flash 0.1s after every 3s ) Normal working Continuously in bright Charging Continuously in dark No battery/troubleshot GPS signal indicator (blue) Status Indication... -
Page 5: Installation
Long press Call Short press when calls coming in Answer Family Number button 1 Short press during calls Turn down the volume Long press during calls Change to speaker mode Short press twice in a row Arm/disarm Mode button Long press Send location to platform automatically once Power ON/OFF... -
Page 6: Parameters Setting
Please send SMS command to the number of terminal so as to set up the DNS parameter. The terminal will reply “OK” automatically after setting successfully. Send SMS command: SERVER,1,DNS,Port,0# e.g. SERVER,1,gt300.goobaby.net,8827,0# 4.3 Add Family Numbers via SMS command (1) Add two Family Numbers Send SMS command:... -
Page 7: Add/Delete Family Numbers Via Platform
4.4 Delete Family Numbers via SMS Send SMS command: FN,D,1,2# (D means delete the number) 1,2 means sequence numbers Send SMS command: FN,D,Phone Number# 4.5 Add/delete Family Numbers via platform You can set SOS numbers via the platform when the terminal connects to the platform. 4.6 Call Family Numbers Long press Family Number buttons can call preset numbers. -
Page 8: Set Sos Number
4.11 Set SOS Number (1) Add SOS number Via SMS command Send SMS command: SOS, A,number1,number2,number3 #(A means add number). You could set 3 SOS numbers in maximum. If set successfully, the terminal will reply “ok”. e.g. SOS,A, 13510****60,135116****6,136126****8# (set all 3 SOS numbers) SOS,A, 13510****60# (set the first SOS number) SOS,A, ,135116****6#... -
Page 9: Vibration Alarm
terminal (must be the SOS number). And it will automatically reply “OK” if set successfully. NOTE: When the vibration alarm is off, the arm function will not be executed. 5.2 Vibration Alarm When the terminal is in arm state, there will be a vibration alarm sent to the SOS numbers in 10s if it detects vibration. -
Page 10: Low Battery Alarm
5.4 Geo-fence Alarm Geo-fence function is off as default. You can log in the platform to turn on and set the Geo-fence. In platform, you can set 5 fences in specific area. There are go-out-fence alarm and go-in-fence alarm. When the terminal enters or leaves specific areas, it will send alarm to SOS number. -
Page 11: Reboot The Terminal
If GPS is located, it will reply google link of current longitude and latitude. If not located within 2 mins, it will rep ly google link of the latest longitude and latitude: e.g. Google link reply <DateTime:10-11-23 23:42:51> http://maps. oogle.com/maps?q=N22.571490,E113.877103 If GPS has never been located before, it will reply SMS after 10mins "GPS is fail to locate, no data, please try aga in!"... -
Page 12: Troubleshooting
command/call to activate checking location function. During this mode, arm/disarm will not be executed. It will reply: “The terminal is in Deep Sleep mode. Please wake up!” Send SMS command: mode,3# 7 Appendix 7.1 Battery security ● Please use the original battery. The warranty will be invalid by using any other accessory. The manufacturer will not take any responsibility for any damage caused by not using the original battery. - Page 13 Cannot get the position data address information ②Contact with your distributor It is not a SOS number Set SOS number Shenzhen Concox Information Technology CO.,Ltd Tel: +86 755 2912 1200 Fax: +86 755 2912 1290 E-mail: jason@concox.cn. Add: 4/F, Building B, Gaoxinqi Industrial Park, Liuxian 1st Road, No.67 Bao'an District, Shenzhen...