Low Battery Alarm - Concox GT300 User Manual

5.4 Geo-fence Alarm
Geo-fence function is off as default. You can log in the platform to turn on and set the Geo-fence. In platform, you
can set 5 fences in specific area. There are go-out-fence alarm and go-in-fence alarm. When the terminal enters or
leaves specific areas, it will send alarm to SOS number.

5.5 Low battery Alarm

When battery is low, the terminal will send SMS to SOS numbers.
5.6 Voice monitor
When SOS number sends monitor command:
the SOS number. After the call connected, the terminal will enter monitor condition. The SOS number can hear the
sound around the terminal.
5.7 Check location
(1)
Ask for address information
Send SMS command from SOS number to terminal:
After command is sent successfully, SOS number will receive an accurate location information.
Only SOS number can check location of terminal.
If GPS is located successfully, terminal will reply SMS of an accurate location information.
If GPS is not located, the terminal will send LBS location first. And then if GPS located within 5mins, the terminal
will send another SMS with accurate location.
e.g. LBS address information: "Current location (LBS): nearby Bao'an Road Bao'an District, Shenzhen,
Guangdong (22.571,113.876)".
e.g. GPS address information: "Accurate location (GPS):Bao'an Road, Bao'an District, Shenzhen, Guangdong
(N22.57139,E113.87710)
(2) Ask for coordinates
Send SMS command from SOS number to the terminal:
Only Family Number or SOS number can apply for replying longitude and latitude from the terminal. If GPS is
located, it will reply current longitude and latitude information. If not located within 5mins, it will reply the latest
longitude and latitude information.
e.g. Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23 22:28:51
If GPS is not located at all, the terminal will reply after 5mins："GPS is failed to locate, no data, please try again!"
(3)Ask for Google link
Send SMS command from SOS number to the terminal:
to the terminal, the terminal will reply "OK" and call
MONITOR#
POSITION#
WHERE#
URL#